Vinyl Products to Waterproof Your Deck

All Seasons Waterproofing's wide variety of 14 colors and textures in our ULTRA and 3-PLY SMOOTHBACK series assures you there is a compatible solution for any application.
..........................................................................................................................................................................................................

 
   


ALL SEASONS ULTRA PRODUCTS:
All Seasons' Ultra vinyls are the perfect solution for decks that require a roofing membrane. Engineered and certified to meet CCMC (Intertek report #3068962) and CGSB (Intertek report #3102078 COQ-002) roofing standards for polyvinyl roofing membranes.

Click on images to enlarge
 
   
Cobblestone
68 mil
60" x 75'
Pebblestone
68 mil
60" x 75'
Sandstone
68 mil
60" x 75'
Antique Beige
68 mil
72" x 75'
 
 
   
Tuscan Grey
68 mil
72" x 75'
Tuscan Beige
68 mil
72" x 75'
River Rock Grey
68 mil
72" x 75'
River Rock Beige
68 mil
72" x 75'
 
 
   
Dove Grey
68 mil
72" x 75'
Beachwood Plank
68 mil
72" x 75'
Driftwood Plank
68 mil
72" x 75'
 
    ..........................................................................................................................................................................................................

ALL SEASONS ULTRA TILE SERIES:   new
All Seasons Ultra Tile Series vinyls look like tile, yet cost less, won't crack like tiles, and is faster to install since it is installed in one step. Tiles on an exposed deck require a waterproof membrane below them, but since our product is a waterproof membrane, it is a complete installation in one step!

Click on images to enlarge

 
   
Tile Sandalwood
68 mil
60" x 75'
Tile Driftwood
68 mil
60" x 75'
Tile Beachwood
68 mil
60" x 75'
 
    ..........................................................................................................................................................................................................

3-PLY SMOOTHBACK FLOORING SYSTEMS:
All Seasons' 3-Ply Smoothback vinyls meet the same roofing standards as the All Seasons Ultra series and provide an alternative where vinyl-back products are required.

Click on images to enlarge

 
   
Dove Grey
60 mil
72" x 75'
Antique Beige
60 mil
72" x 75'
 
    ..........................................................................................................................................................................................................

DIY (Do It Yourself) LINE:
All Seasons' DIY LINE of products are for those who wish to do their own installations.
Our vinyl decking materials themselves will still carry their full warranty, but we cannot offer any warranty on the installation when you do it yourself. It is critical that you use the proper glue because some glues will bleed through the vinyl.

Click on images to enlarge

 
   
Marble Taupe
68 mil
72" x 75'
Marble Grey
68 mil
72" x 75'
Marble Beige
68 mil
72" x 75'
 
     
 
In order to complete your own vinyl deck installation you will most likely require some of the following products:  
 
 
    vinyl adhesive
solvent-based vinyl adhesive
This vinyl adhesive is used with our Ultra and DIY line of vinyl decking membranes. It is a solvent base adhesive that offers outstanding grab characteristics on flat and vertical surfaces. It works with various substrates, (even metals and concrete) and can be used in colder temperature installations (1° C - 40° C). It comes in a 5 US gallon / 18.9 litre pail that weighs 45 pounds / 20 kg. Shelf life is 12 months and must be discarded if subjected to freezing. Coverage is 250 - 300 sq. ft. per pail. (Also available in 1 gallon pails.)
 
 
 
    vinyl adhesive
solvent-based vinyl adhesive
This vinyl adhesive is used with our 3-Ply Smoothback line of vinyl decking membranes. It is a solvent base adhesive that offers outstanding grab characteristics on flat and vertical surfaces. It works with various substrates, (even metals and concrete) and can be used in colder temperature installations (1° C - 40° C). It comes in a 5 US gallon / 18.9 litre pail that weighs 45 pounds / 20 kg. Shelf life is 12 months and must be discarded if subjected to freezing. Coverage is 250 - 300 sq. ft. per pail.
 
 
 
    vinyl adhesive
water-based latex adhesive
This vinyl adhesive is used with our Ultra and DIY line of vinyl decking membranes. It is a water base latex adhesive that offers excellent field workability and low VOC (Volatile Organic Compounds). It is applied using a 1/16" X 1/16" u-notched trowel to porous substrates such as plywood. The vinyl membrane is placed into fresh wet adhesive, resulting in faster installation time and higher productivity. It comes in a 5 US gallon / 18.9 litre pail that weighs 56 pounds. Shelf life is 12 months and must be discarded if subjected to freezing. Coverage is 600 - 700 sq. ft. per pail.
 
 
 
    vinyl deck clips
vinyl deck clips
Available in grey and beige. (Click the image to see a larger picture)
Deck clips are used to finish off the exposed end of the vinyl membrane where it hangs over the edge of a deck and terminates at the end of the deck flashing. The clip is simply pressed on so that the vinyl membrane and the flashing are sandwiched within the clip's sides. Watch the decking installation video to see how it is applied.
 
 
 
    flashing
flashing
Flashing is available as PVC in grey and beige, or as metal in grey and beige.
Flashing is used wherever water can drip off a vertical surface. The shape of the flashing is such that it directs water outward and away from the vertical surface it has just run down. The perimeters of open decks are usually trimmed with flashing to deflect water off facias and into gutters. You will need deck clips to finish off the exposed edge of metal flashing and to prevent the vinyl membrane from curling, whereas the vinyl membrane is welded directly to the PVC flashing when using 3-Ply Smoothback vinyls.
 
 
 
    wood deck drain
wood deck drain
(Click the image for more information)
The WDD1 Wood Deck Drain is used in situations where water cannot freely run off the deck and a drain through the deck is required.
 
 
 
    welded deck drain
welded deck drain
This Deck Drain is welded to our 3-Ply Smoothback vinyls and used in situations where water cannot freely run off the deck and a drain through the deck is required. The design allows for attachment to various sizes of outlet pipe, while still fitting inside confined joist spaces. Membranes can be easily welded to the PVC coated flange, ensuring the best defense against water back-up or penetration underneath the membrane. It has a spun aluminum body and a removable grate.
 
welded deck drain  
 
    overflow drain
overflow drain
An overflow drain is required for enclosed decks and works the same way as bathtubs and sinks require an overflow. The copper overflow is used with our Ultra and DIY line of vinyl decking membranes.
 
 
 
    overflow drain
overflow drain
An overflow drain is required for enclosed decks and works the same way as bathtubs and sinks require an overflow. This overflow with its PVC coated flange is used with our 3-Ply Smoothback line of vinyl decking membranes. It features a heat weldable flange and solid aluminum construction with a 12 inch long, 2 inch outflow pipe that is sloped at 10%.
 
welded overflow drain  
 
    L-trim
L-trim
Available in grey and beige. (Click the image to see a larger picture).
L-trim is used to fasten the edge of vinyl membranes to exterior walls where it is not possible to run up the wall 6 inches and have the building envelope overlap the vinyl membrane. This will often be the case with re-applications where the owner does not wish to damage the building's exterior wall when renewing their deck.
 
 
 
    ChemPatch
ChemPatch
ChemPatch is an all-purpose cement patching compound that is used to correct any irregular surfaces of your deck prior to laying down your vinyl membrane. ChemPatch should be applied at all seams between sheets of wood, over nail heads and the transition between wood deck and flashing. It can also be used to repair voids in the plywood sheeting. Watch the decking installation video to see how it is applied.
 
 
 
    heat gun
heat gun
(Click the image to see a larger picture)
This hot air tool is required for welding the seams of your new vinyl deck. It is also suitable for many other uses such as welding of thermoplastic pipes and other profiles of thermoplastic elastomers. It can be used for heating, drying, shrinking of heat-shrinkable sleeves, soldering, defrosting, and igniting wood chips, paper, coal, or straw. There are a variety of nozzles available for many different applications. (pdf of nozzles) (manufacturer's list of nozzles)
 
 
 
    ..........................................................................................................................................................................................................
 
All products are in stock and available for immediate purchase!